How to reset Bluetooth speakers (Already Paired)

Bluetooth speakers are a dime a dozen these days, and it can be difficult to tell which ones will live up to your expectations. If you’re looking for the perfect speaker that will connect with all of your devices, then we’ve got just the article for you. We’ll discuss how to reset Bluetooth speakers so that they work with any device.

Bluetooth devices have become more popular than ever before, but not every speaker will suit your needs exactly. Some people want a speaker compatible with their iPhone, while others need something compatible with an android phone. In this blog post, we’ll teach you how to reset Bluetooth speakers, so they work on any device.

How to reset Bluetooth speakers or Wireless speakers.

Almost all Bluetooth speakers can be reset by pushing a button (or buttons). If you’re not sure how to do this, look for instructions specific to the make and model of the device in its manual or online.

Some other reasons you might need to reset your Bluetooth device include: It won’t connect properly with another device. It appears frozen. There’s an intermittent connection (for example, sound cuts out intermittently). You can think of more reasons.

If none of these instructions work and you cannot find instructions specific to your device, it’s likely that your Bluetooth speaker is defective and will need to be replaced.

For this case, we’ll assume that there are no instructions for resetting the speaker in its manual or online. If there were, you would have followed them already.

The steps below should get you started:

Make sure the device has enough charge (if not plugged into a power source). Press and hold the power button until all lights turn on. Continue holding until all lights turn off. Release the button. The light should flash blue 5 times shortly after releasing, After which it should return to normal and start blinking. The audio/video (A/V) indicator may blink while connecting with other devices.

If these steps do not work, try the next step:

Press the power button simultaneously until all lights turn off. Release the button. The light should flash for 10 seconds after releasing, After which it should return to normal and start blinking.

How to reset a JBL Bluetooth speaker

To reset your JBL Bluetooth speaker, turn off and disconnect power from your device.

• Step 1: Power off your speaker by pressing the power button for 5 seconds. The multi-colored light ring will pulse several times, indicating that it is powered off.
• Step 2: With the speaker powered off, press and hold the reset button inside of the micro USB port with a paper clip for 10 seconds until you hear two short beeps (your bass control dials should now be set to zero).

How to reset an Awei Bluetooth speaker

If your Awei Bluetooth speaker is not working properly, you can reset it by following these steps:

1. Turn off the speaker and unplug it from any power source.
2. Press and hold the “Power” button for about 10 seconds.
3. While still holding the “Power” button, plug the speaker back into a power source.
4. Release the “Power” button after the speaker turns on.

How to reset a Bose Bluetooth speaker

To reset your Bose Bluetooth speaker, first make sure that it is turned off. Then, press and hold either volume key for 15 seconds until you see an orange light.

This process will delete all profiles you have created and reset the device to its original factory settings.

How to reset an Anker Sound Core Bluetooth speaker

To reset the speaker to the factory default setting, press and hold either volume key for 7 seconds until you hear a beep, then let go of the buttons.

The speaker should now be back to its default presets, ready to connect with any Bluetooth-enabled device.

How to reset a China Bluetooth speaker

To reset a China Bluetooth speaker, you will need to press and hold the power button for about 10 seconds. The speaker will then enter into a deep sleep mode and will need to be turned on again.

All Chinese speakers have different Bluetooth modes, some devices need to remove all the paired devices by pressing and holding the power button for 5 seconds. The multi-colored indicator light will pulse several times, indicating that it is unpaired from the Bluetooth connection.

How to reset a boat Bluetooth speaker

• Step 1: Power on the speaker by holding the power button for 5 seconds. The orange and white light blink for several times, indicating that it is powered off.
• Step 2: Now, press and hold the volume button on the back of the speaker using a pen or toothpick and your speaker will be unpaired to all previously paired devices.

How to reset a Wonderboom Bluetooth speaker

Power on Wonderboom Bluetooth speaker first. And then, you need to press the power button, which is located on the back for three seconds until you see a red to white led light blinking. Your wireless device now be disconnected. Now you can pair your device again to any compatible Bluetooth devicecs.

How to reset an ONYX Bluetooth speaker

Hold down the “M” button and press the Bluetooth button until both buttons light up blue (about 15 seconds).

This will delete all presets and pairings within your Bluetooth system.

How to reset a Portronics Bluetooth speaker

The easiest way to restore your device to factory settings is by using a pin or something sharp to press-hold the reset button under the micro USB port.

Holding the reset button for 7-8 seconds will reset your device to factory settings.

• Step 1: Power down your speaker by pressing and holding the power button for 5 seconds. The multi-colored light ring will pulse several times, indicating that it is powered off.
• Step 2: With the speaker powered off, press and hold the ‘+’ and ‘-‘ buttons on either side of the micro USB port simultaneously until you hear a beep (your bass control dials should now be set to zero).

How to reset a Sonos Bluetooth speaker

The light ring on top of your Play:1 will turn orange, indicating it is in setup mode.

Press-hold the Mute button for 7 seconds.

It will automatically connect to your existing WiFi network.

You can then use an iPhone or computer to get started with Sonos again.

How to reset T&G Bluetooth speaker

The process to reset a T&G Bluetooth speaker may vary depending on the specific model of the speaker. However, in general, you can try the following steps to reset a T&G Bluetooth speaker:

1. Turn off the speaker and unplug it from any power source.
2. Press and hold the “Volume -” button and the “Power” button at the same time for about 10 seconds.
3. Release the buttons and wait for the speaker to turn back on.
4. Connect the speaker to your device again via Bluetooth and check if the issue is resolved.

Note: This is the instruction to reset TG113 Bluetooth speaker, the process will be vary on specific model.

FAQ

How to fix the Bluetooth pairing problem?

First off, try going into the Bluetooth menu on your computer or mobile device and removing all Bluetooth connections from your speakers. You can usually find this option by clicking on ‘Connections’ or looking for an option marked as ‘Bluetooth.’ Once you’re sure both devices are disconnected from each other, try connecting them once more and see if this solves the issue for you.

If that doesn’t work, turn off your speaker, then plug it back in before attempting to pair everything up all over again. This will refresh the software and memory of your speaker to ensure it has all proper Bluetooth settings and anything necessary for pairing.

If you’re still having no luck, download a trusted application like Blueman to try and troubleshoot the issue further. Some apps also offer access to other pieces of information about your speakers, such as its current firmware version or wireless service provider, so you can check if there is an update available and easily install it right from your smartphone screen.

how to factory reset bluetooth speaker?

Resetting bluetooth speaker that don’t support resetting through traditional methods such as holding down the power button requires some unique tricks to complete this process successfully. Make sure you either have nothing plugged into the headphone jack on your device, or the headphone jack is completely disconnected from any power source before you begin.

How do I reset Bluetooth on android devices?

On newer models of Android phones and tablets running Lollipop or Marshmallow, there may be an automated process to complete tasks like resetting Bluetooth. Both manufacturers or carriers may have their method for this, but if you are using the stock version of Android itself, there are a few steps to try out.

How to unpair Bluetooth speakers?

Unpairing a speaker, can be done by using your computer or mobile device to return the pairing process. Once again, follow the power button sequence for ten seconds but simply tap it instead of holding it down when you are ready to end Bluetooth pairing mode if your device cannot pair with the speaker anymore after follow the steps correctly. Congratulations! Your device has successfully been reset and should no longer have any connection issues regarding that model of speaker.

Q: Will I lose my settings or saved data after resetting my Bluetooth speaker?

A: Yes, a reset will erase all of your speaker’s settings, including any saved data, and it will disconnect it from any paired devices.

Q: Why should I reset my Bluetooth speaker?

A: You may need to reset your Bluetooth speaker if it is not connecting to your device properly, if the sound quality is poor, or if you are experiencing other technical issues. A reset can also help if you want to clear the speaker’s memory and disconnect it from any previously paired devices.